Kool Deck & Cool Deck Coating Installation

Kool Deck / Cool Deck Coatings — West Metro Twin Cities, MN

Textured cool deck coatings that keep pool surfaces dramatically cooler under bare feet — applied over new pours or sound existing decks.

A cool deck coating is often the fastest way to make an older pool deck comfortable, safe, and fresh again — one application, no tear-out.

• Noticeably cooler surface temperatures. Cool deck toppings reflect solar heat and break up surface contact with a fine texture, keeping the deck comfortable through full-sun afternoons that make bare concrete unwalkable.
• Slip resistance for wet feet. The knockdown and splatter textures that cool the surface also grip wet feet — a safety upgrade and a comfort upgrade in one application.
• Applies over sound existing decks. A structurally solid deck with cosmetic wear gets a fresh, cooler wearing surface without demolition. Cracks and spalls get repaired first, then coated.
• The original and the modern systems. We install classic Kool Deck cementitious toppings and modern acrylic texture systems, matching the product to your deck condition and climate exposure.
• Color and texture options. From soft neutrals to coordinated two-tone schemes, cool deck systems come in palettes that pair with coping, water features, and your home’s exterior.

Why choose Legacy

Cool deck systems live or die on surface preparation and application technique. The topping bonds only to clean, sound, correctly profiled concrete, and the texture only performs when applied at the right thickness and knocked down at the right moment. Legacy Concrete General Services installs these systems with manufacturer-trained crews who follow the spec — prep, primer, application, and sealing — instead of improvising.

We're licensed, bonded, and insured, and we assess honestly before quoting: a deck with active settlement or structural cracking needs repair or replacement first, and we'll tell you that rather than coat over a failure that will telegraph through in a season.

You receive a written estimate covering surface preparation, crack and spall repair, the coating system, and the pool-rated sealer, backed by our 1-year workmanship warranty. Around water, every product we apply carries a pool-environment rating and slip-resistant finish.

Signs it's the right call

1. The deck is too hot to cross barefoot. Bare and dark-finished concrete absorbs sun until the walk from the door to the water becomes a sprint. A reflective textured topping drops the surface temperature dramatically.
2. The surface has gone slick. Worn, polished-smooth concrete around water is a slip hazard. Cool deck texture restores grip without the harshness of heavy broom or exposed aggregate on bare feet.
3. Cosmetic wear on a sound slab. Stains, fading, minor crazing, and surface dullness on a structurally solid deck are exactly what a coating fixes — a new wearing surface at a fraction of replacement cost.
4. An older Kool Deck is worn through. Original Kool Deck surfaces from decades past wear thin, chip, and fade. We repair the substrate and re-topcoat, restoring the finish the deck was built with.
5. You're pouring a new deck and want it cool from day one. New construction is the ideal time to apply the topping — fresh concrete, clean bond, and a deck that never has a too-hot summer.

If your deck is sound but uncomfortable, a cool deck coating is usually the highest-value improvement in the pool area. Our estimator will confirm the slab qualifies before quoting.

Our process

1. Deck assessmentWe inspect the slab for soundness, test for prior sealers and coatings, identify repairs, and deliver a written estimate with color and texture samples.
2. Repair and preparationCracks and spalls get repaired, the surface gets cleaned and profiled for bond, and the pool and coping get masked and protected.
3. Base and texture applicationWe apply the cementitious or acrylic system to spec thickness, then create the knockdown or splatter texture at the correct set stage.
4. Color and detail workIntegral or applied color goes on per your selection, with clean lines at coping, borders, and expansion joints.
5. SealingA pool-rated sealer with non-slip additive locks in the finish against chlorine, salt splash-out, and UV.
6. Cure and walkthroughThe system cures per manufacturer schedule — typically foot traffic within 24 to 48 hours — and we walk the finished deck with you before wrapping the job.

Most cool deck applications complete in two to four days depending on repairs and weather windows.

Brands and materials we use

Every coating we apply around water is rated for pool environments and finished slip-resistant. During application we mask and protect the pool, keep chemicals out of the water and storm drains, ventilate per manufacturer data sheets, and keep the area closed until the system cures. The result is a deck that is safer than the one it covers — cooler, grippier, and free of the trip edges worn surfaces develop.

Completed projects

Frequently asked questions

Where we install

Kool Deck / Cool Deck Coatings available throughout the West Metro Twin Cities, including Maple Grove, Rogers, Plymouth, Brooklyn Park, Champlin, Osseo and surrounding communities.