Concrete Services Logo

Concrete Driveway Contractor Mound MN

Are you looking to replace your concrete driveway? If so, you’re in the right place! There are a variety of companies throughout the Twin Cities area who specialize in concrete driveways.

Concrete Driveway Contractor

The selection of an apt concrete driveway contractor is crucial for ensuring long-lasting and aesthetically pleasing outcomes.

This article delves into the importance of professional concrete installation, elucidates the reasons behind choosing specialized services, and outlines the manifold benefits.

A comprehensive understanding of these factors will empower homeowners in making informed decisions regarding their driveways' construction or renovation.

What We Do: Concrete Installation

In the realm of concrete installation, a crucial preliminary step involves an informed selection from various types of concrete based on specific project requirements and environmental considerations.

Following this, an intricate outline of the installation process must be devised to ensure effective application, encompassing planning stages through to execution phases.

Lastly, robust post-installation maintenance measures necessitate careful consideration to guarantee that the installed concrete maintains both its aesthetic appeal and structural integrity over time.

Concrete Types Selection

Selecting the appropriate type of concrete plays a crucial role in determining the functionality and longevity of a driveway. A choice between plain, reinforced, stamped or high-performance concrete is guided by factors such as climatic conditions, anticipated traffic load, aesthetic preferences and budget constraints.

Plain concrete offers durability at an economical cost while reinforced concrete provides enhanced strength for heavier loads. Stamped concrete allows for complex designs and textures but requires skilled installation. High-performance concrete offers superior durability but comes with higher costs.

It is essential to make this selection carefully considering all aspects to ensure optimal functionality and longevity. This understanding forms a critical foundation before transitioning into the subsequent section: 'installation process outline'.

Installation Process Outline

Understanding the meticulous steps involved in the installation process can greatly contribute to the successful completion of a construction project. This process commences with site preparation, which involves excavation and grading to create a level base for concrete placement. Subsequently, formwork is installed to shape and contain the concrete mix. Reinforcement using steel bars or mesh ensures structural integrity while control joints are incorporated to manage potential cracking due to thermal expansion.

The next step involves pouring the chosen type of concrete into forms, followed by levelling and smoothing via screeding and floating techniques. The curing period then ensues, requiring careful moisture management for optimal hardness development. To conclude, sealant application offers protection against weathering processes.

Understanding each stage enables collaborative participation in this important construction endeavour.

Post-Installation Maintenance Tips

Proper post-installation maintenance is essential to prolong the lifespan and maintain the aesthetic appeal of any newly constructed structure. It ensures sustained durability, structural integrity, and enhanced visual aspect of concrete driveways.

Regular cleaning with power washing methods will prevent the build-up of grime or dirt that can deface its appearance.

Sealing services are recommended every two years to provide additional protection against weather elements such as UV radiation and precipitation, thus preventing cracks or spalling.

Timely repair works for minor damages prevent them from escalating into significant problems needing complete replacement procedures.

By following these maintenance tips, a sense of belonging to an aesthetically pleasing home environment is fostered within owners.

The subsequent section offers more reasons for choosing our expert concrete driveway services.

Why Choose Our Concrete Driveway Services

In the selection of concrete driveway services, three significant factors demand critical attention: quality assurance, competitive pricing, and exceptional customer service.

Quality assurance pertains to adherence to high standards in material selection and installation procedures which ensures durability and aesthetic appeal.

Competitive pricing denotes a balance between cost-effectiveness and value for money.

Exceptional customer service refers to prompt response, professional conduct, and tailored solutions that enhance overall client satisfaction.

Quality Assurance

Quality assurance plays a crucial role in the construction of concrete driveways, ensuring adherence to industry standards and client expectations. It encompasses rigorous inspection processes, frequent testing, and continuous monitoring of construction practices. This process guarantees the longevity and durability of the final product.

The table below outlines key parameters in quality assurance:

Quality Assurance Parameter Description
Material Testing Ensures materials meet required specifications
Workmanship Inspection Checks for proper installation techniques
Equipment Calibration Verifies accurate functioning of tools used
Documentation Review Confirms compliance with regulatory requirements
Client Feedback and Satisfaction Survey Measures customer satisfaction

Through meticulous attention to these factors, it is possible to achieve a concrete driveway that not only satisfies but exceeds client expectations while adhering to stringent industry regulations.

Competitive Pricing

Competitive pricing remains a critical factor in the construction industry, influencing client decisions and shaping market trends. As concrete driveway contractors navigate this terrain, astute comprehension of market dynamics becomes indispensable.

To provide clients with competitively priced services while maintaining high-quality standards, these professionals typically consider:

Adherence to such strategies fosters an environment of trust between contractor and client, reinforcing a sense of belonging within this community. This ultimately contributes to sustained business growth and stability in a highly competitive landscape.

Exceptional Customer Service

Having explored the financial considerations of engaging a concrete driveway contractor, the focus now shifts to another integral aspect: Exceptional Customer Service.

This element is paramount in ensuring a seamless progression of construction projects and fostering a sense of belonging among clientele. A high level of customer service encompasses timely and effective communication, meticulous attention to detail, prompt resolution of issues, and demonstrating empathy towards client concerns.

Contractors who excel in this area typically exhibit profound knowledge about product specifications, installation procedures, maintenance tips and troubleshooting advice. Moreover, they are adept at customizing solutions to meet unique customer requirements.

Therefore, while affordable rates are attractive, equal weight should be accorded to exceptional customer service when choosing a concrete driveway contractor.


In the realm of concrete driveway services, salient benefits such as durability and longevity, ease of maintenance, and the potential for aesthetic appeal upgrades figure predominantly.

The first point of discussion elucidates on how robustness and extended service life are inherent attributes to a well-constructed concrete driveway, ensuring its ability to withstand harsh weather conditions and heavy vehicular traffic over time.

Further discourse will focus on how minimal upkeep requirements contribute to overall cost-effectiveness, followed by an examination into the myriad possibilities for aesthetic enhancements that can significantly boost curb appeal.

Durability and Longevity

Durability and longevity are critical factors to consider when choosing a material for driveway construction. Concrete often emerges as the preferred option due to its ability to withstand heavy loads and adverse weather conditions.

The superior durability of concrete is attributed to several key properties. Firstly, concrete displays an impressive capacity to resist deformation under stress, ensuring stability and resistance against wear. Additionally, concrete successfully resists damage from extreme heat, cold, rain, snow, and ice. Moreover, the resilience of concrete extends to resisting stains or degradation from oil spills or other vehicle fluids.

These inherent characteristics make concrete an ideal choice for driveways that require long-term strength and endurance. This discussion segues into the next important consideration - maintenance ease.

Maintenance Ease

Maintenance ease is another significant factor when selecting materials for construction purposes, with certain options requiring less frequent and less costly upkeep. Concrete, a staple in the repertoire of any credible driveway contractor, presents itself as an ideal choice for its minimal maintenance demands. This ubiquitous material necessitates only occasional sealing to prevent surface damage and staining, thus minimizing labour input and associated costs. Furthermore, concrete possesses resilience against elements such as temperature fluctuations and precipitation - characteristics that prolong its service life without major repairs or replacements. The technical term 'life-cycle cost' encapsulates this balance of initial investment versus ongoing maintenance expenditure, reinforcing the financial viability of concrete as a construction material.

As one navigates through this intricate process of selection, it becomes apparent that aesthetic appeal upgrade is another crucial consideration to be discussed next.

Aesthetic Appeal Upgrade

Aesthetic appeal upgrade, as a significant factor in materials selection for construction purposes, involves assessing the visual attractiveness of potential materials and their ability to enhance the overall look of the structure. The right concrete driveway contractor can leverage this aspect by utilizing materials that range from simple grey concrete to decorative, coloured or stamped varieties.

Thus, aesthetic upgrade not only increases property value but also fosters a sense of belonging amongst residents due to its visually pleasing nature.


To acquire top-notch concrete driveway services, it is highly recommended to contact a professional contractor. This step ensures the execution of precise techniques and the usage of quality materials, resulting in an aesthetically pleasing and durable driveway.

Contractors skilled in this field come equipped with extensive knowledge and experience, enabling them to efficiently manage different phases of construction. Their expertise spans from site preparation involving excavation and subgrade compaction to final touches like applying sealant for long-term protection. It is their proficiency that assures seamless project execution while adhering strictly to safety protocols.

Furthermore, these professionals are updated on technical specifications such as the ideal concrete mix design suitable for driveways, ensuring optimal strength and durability. They also understand local climate conditions which influence decisions on concrete curing time and protective measures against environmental stressors.

In addition to these aspects, customer service is another crucial consideration when choosing a contractor. They should be communicative, responsive, transparent about costs, and open to client suggestions. Thus, creating a sense of belonging where clients' inputs are valued leading toward a satisfactory outcome.

CALL 763-373-4763 or REACH US HERE 

Frequently Asked Questions

What Is the Average Duration for a Concrete Driveway Project?

The typical duration for a concrete driveway project, contingent upon factors such as size and complexity, generally spans between two to seven days. This timeframe includes preparation, pouring, and adequate time for curing the concrete.

How Does Weather Affect the Installation or Curing Process of a Concrete Driveway?

Weather significantly influences the installation and curing process of a concrete driveway. Precipitation can dilute the mix, while extreme temperatures can cause improper curing, resulting in a weaker final product with decreased longevity and resilience.

Is There Any Specific Maintenance Required for a Concrete Driveway?

Regular maintenance for a concrete driveway includes routine cleaning, immediate removal of stains, periodic resealing to prevent water damage, and repair of cracks or other damages to prolong its service life.

What Are the Potential Issues or Problems That Can Arise With a Concrete Driveway Over Time?

Potential issues with concrete driveways over time can include cracking due to temperature fluctuations, staining from oil or other substances, erosion from weathering and potential damage from heavy vehicles or machinery.

Are There Any Eco-Friendly Alternatives to Traditional Concrete for Driveways?

Indeed, green alternatives to traditional concrete for driveways are available. These include permeable pavement materials, recycled plastic paving, resin-bound gravel and grasscrete, all of which contribute to sustainable construction practices in varying degrees.



Services Offered by us - Concrete Contractor

If you're looking for reliable service and quality craftsmanship, you've come to the right place!

Legacy GS provides a wide range of services that include, driveways, sidewalks, patios, stairs and retaining walls. We also specialize in repair work such as patching cracks and fixing uneven surfaces.

In addition to laying down concrete, Legacy GS offers decorative finishes such as stamped or colored patterns that can make your outdoor space look stunning.


At Legacy General Services, we have been providing top-notch concrete services for over 10+ years. Our mission is to provide our clients with the highest quality workmanship and exceptional customer service. We are fully licensed and insured, and our team of experts is certified in all aspects of concrete installation and repair.

Concrete Driveway Contractor Mound MN


Mound is a small city in western Hennepin County, Minnesota, United States. The population was 9,052 at the 2010 census. Mound was the birthplace of the Tonka truck that is named after Lake Minnetonka, which the eastern part of town sits on. Mound is 22 miles west of Minneapolis, the county seat.
• Things to do • Wikipedia • Google map




Concrete contractors are responsible for building structures and surfaces using concrete. Our job involves choosing the right concrete, preparing the site, forming, pouring, and finishing.


Ready to get started on your concrete driveway construction project? Make sure you're familiar with the installation process so you know what to expect from your service professionals.